1260°C Ceramic Fiber Insulation Module with Remot | RFQ Sourcing Details

Product overview This ceramic fiber module is manufactured from compressed ceramic fiber blanket and is intended for thermal insulation linings in industrial furnaces and kilns. The module is white, regularly shaped, and designed to be secured to anchoring nails on the steel shell of an industrial furnace.

The listed configuration places the anchor remo assification-temperature grades are 1100°C, 1260°C, 1360°C, 1430°C, and 1500°C, while the general also states a 1050–1400°C range. Density is listed as 250–320 kg/m³, and rupture strength as 0.5 MPa.

Available dimensions include 300 × 300 × 300 mm and 600 × 300 × 30 mm, with listed lengths of 600–1220 mm and thicknesses of 6, 10, 15, 20, 25, 30, 40, and 50 mm. Customization is stated as available.

The supplied technical table reports linear shrinkage after firing of no more than -4% under grade-specific test conditions. It also lists thermal-conductivity values of 0.132 W/(m·K) at 600°C, 0.15 W/(m·K) at 800°C, and 0.19 W/(m·K) at 1000°C for applicable grades.

Because the source table does not map every value unambiguously to every grade, buyers should obtain the grade-specific datasheet before design approval.

Listed application areas include tunnel, shuttle, and roller kilns;heating, cracking, coking, and atmospheric-pressure furnaces;flues;ladle covers;annealing, hood, and stepping furnaces;hot-air pipes;waste incinerators;RTO waste-gas treatment furnaces;and SCR catalytic furnaces.

Procurement questions to confirm Before ordering, confirm the exact classification-temperature grade, continuous operating-temperature limit, chemical composition limits, density, finished dimensions, compression, fiber orientation, and anchor alloy and geometry.

Ask for a drawing showing the remote-anchor position and verify that it matches the furnace shell, lining thickness, installation pattern, atmosphere, gas velocity, and mechanical loads.

Also confirm grade-specific thermal conductivity and shrinkage data, tolerances, packaging, required inspection records, and whether the selected module is suitable for the intended furnace environment.

The product title references hot-gas filtration and boiler use, but the supplied technical description primarily documents furnace-lining insulation;suitability for filtration or a particular boiler should therefore be verified in writing.