
Automatic Barrier Remote Control Receiver with 3 | RFQ Sourcing Details
Industrial Robots · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Industrial Robots. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
Product Detalis Specification 1. Working voltage: 220VAC,50HZ 2. Loading capacity: 2HP,240VAC 3. Working frequency: 433.92MHz 4. Built-in fuse: electrocircuit (0.5A), motor (10A) 5. Temperature range: -20ºC to 60ºC. 6. Code:Rolling code 7. with external button and photocell protection 8.
Size: 113×74×44MM Safety Instruction 1. For security, please read the instructions carefully before initial operation;making sure that the power is off before connection. 2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range) 3.
It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes) 4. It should be applied in dry indoor place or in the electric appliance place.
Set up 1 Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully. 2.
Erasing Transmitter: Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green.
It indicates that the erasing process is successful Operational process 5.1 Three button control system with transmitter and non-Latch model Button 1,2,3 in transmitter is in correspondence with open, close and stop.
5.2 Single button control system and non-Latch model "Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop.
Single-button control is only effective to the learned button;if a new button of transmitter learned into the control panel, the formal one is useless. (e.g.: if learned button 1 at first, and then button 2 or 3 the former button 1 becomes invalid)." 5.3 Infrared sensor protection, It only work when door closing.
Motor stops after 1 second and reverse when photocell signal disconnecting during door closing.
(External photocell PHOTO port connects photocell normally close switch) 5.4 with external switch, External switch is single button control.Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop.
Series Internal/external Working voltage Surface Button Photocell Loading capacity Size (mm) Output voltage External swit
Automatic | Applications and Buyer Notes
Automatic is organized as a sourcing-ready Industrial Robots reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time quest
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Industrial RobotsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Size
- (mm) OutputBased on visible page data; confirm exact value in the RFQ.
- Task
- ProgramBased on visible page data; confirm exact value in the RFQ.
- Motors
- AC MotorBased on visible page data; confirm exact value in the RFQ.
- Origin
- ChinaBased on visible page data; confirm exact value in the RFQ.
- Signal
- ContinuousBased on visible page data; confirm exact value in the RFQ.
- Channel
- 1Based on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kg 50kg Rice Sugar Fertilizer Bag Controller Weight Indicator Controller With High Speed Bst106 MThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Drives Servos And Motors categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Robots Vision And Control Cabinets categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Plc Hmi And Controllers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sensors And Switches categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 4086a Four Axis Industrial Manipulator Servo High Speed VersionThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 6es7132 4hb01 0ab0 100 Plc Module Industrial Logic Controller Board For SiemensThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Plc Controller Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 5mm Cannula Water Flow Food Grade Abs Material Dc4 5 15v Magnetic Mini Water Flow Rate SensorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 17 4ph Laser Welded Weighing Sensor LoadThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1756 Esmcap Plc Programming Controller With 24 V Dc Inputs And Relay OutputsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
PLCDriveHub related sourcing paths
PLCDriveHub procurement phrases
PLCDriveHub related product samples
Suitable for Ration Packing Scale with optional modes 1-Bucket Scale, 1-Bag Scale, 2-Bucket Scale[1-Bag] , 2-Bucket Scal...
Robots and Machine Vision Price Discount Mitsubishi Central Processing Unit Q Series Q03udvcpu Programmable Logic Controller M1,Company Introduce Chengdu Canmeng Trading Co., Ltd. is located in the beautiful land of Tianfu, Chengdu. We are a comp...
Robots and Machine Vision China Factory 4 Axis Router CNC Controller Support Atc PLC & Marco for Router Machine Rtcp HMI - 4 AFeature And Function Introduction-F8 function selection buttons
Robots and Machine Vision PLC Suppliers PLC Programming Controller Cp1l-Em40dt-D for Omron - PLC and Cp1l-Em40dt-DCP1L-EM40DT-D Product Name plc Model CP1L-EM40DT-D Place of origin China Condition 100%Original Technical consulting sup...
Robots and Machine Vision Mitsubishi Original New Q01ucpu Q02ucpu Q00jcpu Q Series Central Processing Unit Programmable Contro1,Company Introduce Chengdu Canmeng Trading Co., Ltd. is located in the beautiful land of Tianfu, Chengdu. We are a comp...
Robots and Machine Vision Precision Motion Control Module Qd75D1 for Automated Machinery Module - PLC and ModuleProduct name Module 1pcs Delivery time 3-5days Payment terms T/T, Paypal, Alipay, Trading terms EXW, FOB, CIF, CFR Class...




