PLCDriveHubPLC, HMI, sensors, drives, controllers, robots, and factory automation parts for global industrial buyers.
High Quality Tail Lift Lighting Light Forklift Flashing Safety Warning Light
Industrial Robots

High Quality Tail Lift Lighting Light Forklift Fl | RFQ Sourcing Details

Industrial Robots · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryIndustrial Robots
Unitset
ModelNumber BS-2001A tail lift safety light flashing mode 4 x 1.5 W LED magnifying optics
Power12pcs*5W Input Volt. 12-24V DC Waterproof rate IP67 LED
coloramber-yellow operating temperature-30 ° C to + 60 ° C LED lifespan >50000 hours
CategoryIndustrial Robots
AvailabilityInquiry required
Updated2026-05-27

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Industrial Robots. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

it with its very flat and slim design, is perfectly suited for all kinds of lifts or other surfaces where there is no space for bigger strobe-lights, nor should sight much. The warning light has 6 different patterns. The lamps remembers the pattern, so that you do not have to do a new setup each time.

R6 and R10 approved.

Connection The strobe and warning light is connected like shown below: Red = Plus warning light (12V-36V) Black = Minus / Ground Yellow = Flash pattern White = Synchronization Gray = Signal for constant light by wiring to red / plus Flash-pattern When you pulse the yellow wire to plus under 1 second the lamp changes to the next flash pattern.

If you hold it in for 1-3 seconds it will go back to the previous pattern. If you hold it in for more than 5 seconds it will turn off. Grouping When you connect both red and yellow to plus at the same time, the grouping setup is started. The lamp with then flashes once or twice to show the setup grouping.

You can change the group by pulsing the yellow wire to plus.

As soon as you turn off the lamp, it will remember set grouping Facts Consumption 12V / 24V: 0,19A / 0,09A LEDs: 4*1,5W Voltage: 12-36V DC Work temperature: -30°C til +60°C IP rating Rating: IP 67 Solid: 6 - Comple .0 mm Length 74.0 mm Model Number BS-2001A tail lift safety light flashing mode 4 x 1.5 W LED magnifying optics Power 12pcs*5W Input Volt.

12-24V DC Waterproof rate IP67 LED color amber-yellow operating temperature -30 ° C to + 60 ° C LED lifespan >50000 hours Warranty 24 months

High | Applications and Buyer Notes

High is organized as a sourcing-ready Industrial Robots reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Industrial RobotsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Model
Number BS-2001A tail lift safety light flashing mode 4 x 1.5 W LED magnifying opBased on visible page data; confirm exact value in the RFQ.
Power
12pcs*5W Input Volt. 12-24V DC Waterproof rate IP67 LEDBased on visible page data; confirm exact value in the RFQ.
color
amber-yellow operating temperature-30 ° C to + 60 ° C LED lifespan >50000 hoursBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryIndustrial Robots
Unitset
ModelNumber BS-2001A tail lift safety light flashing mode 4 x 1.5 W LED magnifying optics
Power12pcs*5W Input Volt. 12-24V DC Waterproof rate IP67 LED
coloramber-yellow operating temperature-30 ° C to + 60 ° C LED lifespan >50000 hours

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

PLCDriveHub related sourcing paths

Related categories PLCDriveHub related paths

Robots and Machine Vision

Industrial Robot Arms

PLC, HMI and Controllers

Related applications PLCDriveHub related paths

Robotic Picking And Inspection

Related solutions PLCDriveHub related paths

Sensor And Drive Integration

PLCDriveHub procurement phrases

PLCDriveHub related product samples