PLCDriveHubPLC, HMI, sensors, drives, controllers, robots, and factory automation parts for global industrial buyers.
Multi-Functional Single to 3phase 0.1kw to 30kw Profinet Bus Servo Drives with Servo Motor
Traffic Safety Facilities

Multi-Functional Single to 3phase 0.1kw to 30kw Profinet Bus Servo Drives with Servo Motor

This detail page turns one product record into a narrower sourcing decision with clearer category fit, adjacent routes and RFQ-ready context.

Quote on request

Multi-Functional | Applications and Buyer Notes

Multi-Functional is organized as a sourcing-ready Traffic Safety Facilities reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Drives, Servos and MotorsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Alarm data tracking function
Record 4 groups of historical alarms and relevant dataBased on visible page data; confirm exact value in the RFQ.
Altitude
≤ 1,000mBased on visible page data; confirm exact value in the RFQ.
Ambient humidity
Working/storage: ≤ 90%RH (without dew condensation)Based on visible page data; confirm exact value in the RFQ.
Anti-vibration impact strength
Vibration: ≤ 4.9m/s² (no operation at the point of resonance is permitted), impaBased on visible page data; confirm exact value in the RFQ.
Antirust treatment
Before installation, please wipe off the "rust inhibitor" on the extension of thBased on visible page data; confirm exact value in the RFQ.
Application
Electrical and power distributionBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Product sourcing profile

CategoryTraffic Safety Facilities
Inquiry workflowPlatform RFQ workflow
AvailabilityInquiry required
Updated2026-05-04

Product introduction

Home Electrical & Electronics Electrical Control System Multi-Functional Single to 3phase 0.1kw to 30kw Profinet Bus Servo Drives with Servo Motor US$1.00-1,580.00 1 Set-led product discovery for buyers looking for drives, servos and motors options. The page is organized around specification review, application fit, and inquiry-ready comparison.When evaluating this product, buyers should confirm application fit, required performance range, installation environment, lead time, documentation, and whether the supplier can support OEM or project quotations. Current vertical focus: plc, hmi, sensors, drives, controllers, robots, and factory automation parts sourcing and rfq-ready export supply platform.

Selection and RFQ points

Review material fit, application context, alternatives and RFQ detail before comparing related product paths.

Material fit Bus Servo Drives Servo Motor

Confirm material, size, finish, tolerance and processing needs before price comparison.

Application fit application, operating environment and usage frequency

Add the target application and operating context so related products can be compared correctly.

Alternative path Servos Motors

Use nearby materials, equipment types or category pages when this record is close but not exact.

RFQ detail Quantity, destination, timing

Include quantity, destination, target delivery window, packaging and any technical constraints.

Key specifications

CategoryDrives, Servos and Motors
Brand
Unitset
Alarm data tracking functionRecord 4 groups of historical alarms and relevant data
Altitude≤ 1,000m
Ambient humidityWorking/storage: ≤ 90%RH (without dew condensation)
Anti-vibration impact strengthVibration: ≤ 4.9m/s² (no operation at the point of resonance is permitted), impact: ≤ 19.6m/s²
Antirust treatmentBefore installation, please wipe off the "rust inhibitor" on the extension of the servo motor shaft before relevant antirust treatment.
ApplicationElectrical and power distribution
Basic SpecificationControl method IGBT PWM control sine-wave current drive
Built-in functionOver-travel prevention function Stopped immedia
Cable stress conditionDo not bend the cables excessively or apply tension to them, especially for the 0.14 mm 2 or 0.2 mm 2 core wires of the encoder signal cables, which is very thin. So please do not stretch them too tightly during wiring and use.When installing in the tow ch
Capacity2.800kg
CategoryDrives, Servos and Motors
Centering•Please use a coupling to connect the device with the machine and keep the axis of the servo motor in a straight line with that of the machinery. The radial runout of the coupling should not be greater than 0.03 mm. If centering is not sufficient, vibratio
CertificationISO: 9001, CE
ConditionNew
Connector handlingFor the connector part, please pay attention to the following:
Control MethodIGBT PWM Control Sine-Wave Current Drive
Cooling MethodFan Cooling
Cooling methodFan cooling
Countermeasures for oil and waterFor use in places with water dripping, please confirm the protection rating of the servo motor before use (except the shaft penetration part). For use in places where oil drips to the shaft penetration part, please be sure to use servo motors with oil seal
CustomizationAvailable
CustomizedCustomized
Digital outputFuntional Location available Servo ready, brake output, motor rotation output, zero-speed signal, torque limit, rotating speed limit, warning output, fault output etc.
Electronic gear ratio1.0 ≤ B/A ≤ 64000.0
Environment temperature0~50ºC : Maximum 0.3%
Feature Highlightsaluminum, digital, automatic
Feedback17-bit incremental/encoder, 23-bit absolute encoder
Frequency Bandwidth1.2kHz-Bit Encoder
Frequency bandwidth1.2kHZ-bit encoder
Front Panel5 Keys, 5-Digit LED
Front panel5 keys, 5-digit LED
FunctionAutomatic Control
Input/output signalDigital input port Funtional Location available Fault reset, forward drive disable, reverse drive disable, forward inch, backward inch, electronic gear ratio switching etc.
Installation direction•Servo motor can be installed in a horizontal or vertical direction. Please do not install the device obliquely, otherwise it may cause wearing of motor bearing.
ItemSpecification
MaterialAluminum Alloy
Mathematical ModelLinear
Min setting time5ms (no load, from rated speed to positioning completion)
Model NO.EA180P
Notes for encoders•The shaft extension shall not be impact during installation, otherwise the encoder inside will be cracked.
OriginChina
PerformanceSpeed-torque control mode Speed fluctuation ratio Load fluctuation 0~100 load: Maximum 0.3% Based on 23bit encoder, at rated speed
Pollution Level2 Level
Pollution level2 level
Position control modeFeedforward compensation Resolution 0~100% (set resolution 1%)
Positioning completion width1~655,335 instruction units (set resolution to 1 instruction unit)
Power0.1kw
Product TitleMulti-Functional Single to 3phase 0.1kw to 30kw Profinet Bus Servo Drives with Servo Motor
Protection LevelIP10
Protection levelIP10
Protective FunctionOver-voltage, under-voltage, over-speed, overheat, overload, over-speed, over-tem-perature, encoder fault, braking resistor overload fault, EEPROM fault, abnormal communication etc.
Pulley installation• When installing pulleys on a servo motor shaft with a keyway, use screw holes at the shaft end. In order to install the pulley, first insert the double-headed nail into the screw hole of the shaft, use a washer on the surface of the coupling end, and gra
RS232 communicationStatus display, user parameter setting, monitoring display, alarm tracking display, JOG operation and automatic adjustment operation, speed instruction signal etc.
Refund policyClaim a refund if your order doesn't ship, is missing, or arrives with product issues.
Regenerative brakeBuilt-in brake unit and resistor;an external braking resistor can be connected
Secure paymentsEvery payment you make on Made-China.com is protected by the platform.
Shipping Cost.
SignalContinuous
Six control modesSpeed control, position control, torque control, speed/position control, torque/speed control, position/torque control
Soft start time setting0~30s (acceleration and deceleration can be set respectively)
Speed regulation ratio1:5000-tinuous stable operation under the rated load
StructureClosed-Loop
Supply voltage changeAt rated voltage ± 10%: Maximum 0.3%
TaskProgram
Torque control accuracy±3% current repetition accuracy
TrademarkSINEE
Transport PackageWooding
US$1.00-1,580.001 Set (MOQ)
Use conditionsEnvironment temperature Working temperature 0~40° , storage temperature-20° ~85°
Voltage220v

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Related keyword paths

Grouped by the product keyword that generated the related path.

SOURCING DECISION BRIEF

Multi-Functional Single to 3phase 0.1kw to 30kw Profinet Bus Servo Drives with Servo Motor sourcing decision brief

This detail page turns one product record into a narrower sourcing decision with clearer category fit, adjacent routes and RFQ-ready context.

Category
Drives, Servos and Motors
Price status
Quote on request
Inquiry model
Structured product RFQ with quantity, destination and technical requirements.
Availability
Confirm by inquiry
Sourcing lens
Product detail to shortlist decision
Primary compare
Category, Brand, Unit
Record focus
Multi Functional Single To 3phase 0.1kw To 30kw Profinet Bus Servo Drives With Servo Motor
Category focus
Traffic Safety Facilities
Buyer checklist
  • Category fit: Confirm whether the product belongs to the right category and nearby application path before outreach.
  • Specification depth: Review the visible specifications and convert missing fields into a clearer RFQ requirement set.
  • Route expansion: Use adjacent category, solution and procurement routes before settling on one detail page.
How should buyers use this detail page?

Use the detail page as a product-fit checkpoint. Confirm category placement, visible specifications and adjacent sourcing paths before sending an RFQ.

What should buyers compare first?

Compare the visible specifications, category fit and the nearest application or solution routes before asking for supplier options.

PLCDriveHub related sourcing paths

PLCDriveHub procurement phrases

PLCDriveHub project-fit checks

Application Confirm Application before comparing offers or moving the inquiry forward.
Country Confirm Country before comparing offers or moving the inquiry forward.
Capacity Confirm Capacity before comparing offers or moving the inquiry forward.
Material Confirm Material before comparing offers or moving the inquiry forward.
Application route Use Application to compare adjacent options instead of relying on one broad title match.
Country route Use Country to compare adjacent options instead of relying on one broad title match.

PLCDriveHub related product samples

Procurement notes

If visible specifications are still thin, add model, material, interface, quantity, application fit, destination and target lead time before comparing quotes.

Next sourcing actions