Siyuer 998. Ta 2–4 Axis CNC Lathe Motion Controll | RFQ Sourcing Details
Motion Controllers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Motion Controllers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The Siyuer 998. Ta is a CNC lathe motion controller configured for 2–4 axes. Its motion-control specification identifies X, Z, Y, and A axes, with linear and circular interpolation.
Axis commands can be supplied as pulse plus direction or orthogonal pulse signals for connection to suitable AC servo or stepper drive units. The controller supports rapid movement up to 30,000 mm/min and cutting feed up to 15,000 mm/min or 500 mm per revolution.
Rapid override settings are F0, 25%, 50%, and 100%, while cutting-feed adjustment covers 0–150% in sixteen levels. Handwheel increments are selectable at 0.001, 0.01, and 0.1 mm. The stated minimum command unit is 0.001 mm, and the listed position-command range is -9999.999 to 9999.999 mm.
Programming functions include straight-line and arc interpolation, automatic chamfering, threading cycles, user macros, nested subroutines, and a listed set of G and M instructions.
The system provides 32 tool positions, 32 sets of X- and Z-axis tool-length compensation, tool-tip radius compensation using method C, backlash compensation, and pitch-error compensation across 512 points. Program storage is stated as 164M with capacity for up to 10,000 programs.
For spindle control, the unit provides two 0–10 V analog output channels. The specification describes operation with a servo spindle or frequency converter, four spindle gears, frequency-conversion gears, and spindle encoder settings from 100 to 5,000 pulses per revolution.
The interface has an 800 × 600 display, Chinese and English modes, processing-trajectory graphics, an alarm log, a real-time clock, and full-screen program editing. Procurement note: several listing details should be reconciled before configuration approval.
The overview identifies an 8.4-inch screen, while the detailed description calls it an 8-inch LCD.
Buyers should also confirm the ordered axis count, required drive signal format, encoder specification, I/O allocation, spindle interface, power input, controller dimensions, included cables and accessories, and whether the requested machine functions require custom macros.
Confirm the exact enclosure and panel materials because the listing separa ables, firmware language, and the final packing configuration should also be checked against the purchase specification.
Siyuer | Applications and Buyer Notes
Siyuer is organized as a sourcing-ready Motion Controllers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questio
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- 998TaBased on visible page data; confirm exact value in the RFQ.
- Interpolation
- Straight line and arcBased on visible page data; confirm exact value in the RFQ.
- Tool positions
- Up to 32 positions, T01–T32Based on visible page data; confirm exact value in the RFQ.
- Controlled axes
- 2–4 axes;X, Z, Y, and A identifiedBased on visible page data; confirm exact value in the RFQ.
- Axis output signals
- Pulse plus direction or orthogonal pulseBased on visible page data; confirm exact value in the RFQ.
- Maximum rapid speed
- 30,000 mm/minBased on visible page data; confirm exact value in the RFQ.
- Handwheel increments
- 0.001, 0.01, and 0.1 mmBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 15 5mm Cannula Water Flow Food Grade Abs Material Dc4 5 15v Magnetic Mini Water Flow Rate SensorThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Plc Hmi And Controllers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Drives Servos And Motors categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Factory Sensor Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Industrial Automation Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Plc Controller Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Robots Vision And Control Cabinets categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sensors And Switches categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 6av2124 0mc01 0ax0 New Hmi Touch PanelThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1756 Esmcap Plc Programming Controller With 24 V Dc Inputs And Relay OutputsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1756 Ov16e Controllogix 16 Point Electronically Fused Dc Sinking Output ModuleThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
SZGH-880TC Programmable CNC Lathe Motion Controller with 8.4-Inch DisplayRequest Quote
Delta DVP20PM00D DVP-PM 2-Axis Motion Control PLC with Linear and Arc InterpolationRequest Quote
ZY72B8E-2000N EtherCAT Motion and Laser Controller for Double-Crossbeam SystemsRequest Quote
EA350 High-Speed Closed-Loop Servo Drive Controller for Robotics and AutomationRequest QuotePLCDriveHub related sourcing paths
PLCDriveHub procurement phrases
PLCDriveHub related product samples
About Bedford Guangzhou Bedford Electric Equipment Co., Ltd. has focused on automatic water pump controllers and solar p...
PLC, HMI and Controllers Supmeter Dual Scales Bag Packaging Machine Weight Controller, with RS232 RS485 Modbus RTU - Weight SSuitable for Ration Packing Scale with optional modes 1-Bucket Scale, 1-Bag Scale, 2-Bucket Scale[1-Bag] , 2-Bucket Scal...
PLC, HMI and Controllers Siemens PLC 6es7672-7AC01-0yg0 /Siemens S7-200/ S7-1200/ S7-1500/ S7-300/S-200 Smart - 6es7672-7AC01GuiLin SanHua Mechanical&Electrical Automation Engineering Co.,Ltd.-term s
PLC, HMI and Controllers Siemens PLC 6es7 515-2am02-0ab0 /Siemens S7-200/ S7-1200/ S7-1500/ S7-300/S-200 Smart - 6es7 515-2amGuiLin SanHua Mechanical&Electrical Automation Engineering Co.,Ltd.-term s
PLC, HMI and Controllers Price Discount Mitsubishi Central Processing Unit Q Series Q03udvcpu Programmable Logic Controller M1,Company Introduce Chengdu Canmeng Trading Co., Ltd. is located in the beautiful land of Tianfu, Chengdu. We are a comp...
PLC, HMI and Controllers Supporting Atc+PLC+Marco+Rtcp+HMI 3 4 5 6 Axis (XYZ) CNC Milling Controller with Servo Systems CNC MFeature And Function Introduction-F8 function selection buttons