PLCDriveHubPLC, HMI, sensors, drives, controllers, robots, and factory automation parts for global industrial buyers.
Wcb Inverted Bucket Steam Trap Flange Ends
Industrial Robots

Wcb Inverted Bucket Steam Trap Flange Ends | RFQ Sourcing Details

Industrial Robots · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryIndustrial Robots
Unitset
ModelDN A C D B Maximum pressure kg/cm 2 880 1/2 '' 3/4 ''
DiameterDN15-50 mm. Body
CategoryIndustrial Robots
AvailabilityInquiry required
Updated2026-05-27

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Industrial Robots. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

WCB Inverted Bucket Steam Trap Flange Ends Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate.

The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is comple verted bucket causes it to float.and the lever arm drives the valve corce to close.

A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve.

When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.

Structural C haracteristic Inverted bucket type steam trap,as amechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base .

It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic.

The trap may be assembled with check valve so as to save piping space. Field of Application. Product Name:88X Inverted Bucket Steam Trap. Pressure Rating: 1.6- 4.0 Mpa. Nominal Diameter: DN15-50 mm. Body Material: cast steel. Standard Flanges: DIN, ANSI, JIS, JB79. Standard Screwed: NPT,BSP.

M aterial of M ain C omponent . Name of component Material of component Valve body, valve cover WCB Internal components stainless steel Valve body, valve cover WCB Internal components stainless steel Main External D imension s. Thread Model DN A C D B Maximum pressure kg/cm 2 880 1/2 '' 3/4 ''

Wcb | Applications and Buyer Notes

Wcb is organized as a sourcing-ready Industrial Robots reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions b

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Industrial RobotsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Model
DN A C D B Maximum pressure kg/cm 2 880 1/2 '' 3/4 ''Based on visible page data; confirm exact value in the RFQ.
Diameter
DN15-50 mm. BodyBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryIndustrial Robots
Unitset
ModelDN A C D B Maximum pressure kg/cm 2 880 1/2 '' 3/4 ''
DiameterDN15-50 mm. Body

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

PLCDriveHub related sourcing paths

Related categories PLCDriveHub related paths

Robots and Machine Vision

Servo Drives and Motors

Industrial Robot Arms

Related applications PLCDriveHub related paths

Robotic Picking And Inspection

Related solutions PLCDriveHub related paths

Sensor And Drive Integration

PLCDriveHub procurement phrases

PLCDriveHub related product samples