PLCDriveHubPLC, HMI, sensors, drives, controllers, robots, and factory automation parts for global industrial buyers.
F3C-08KN02 Unshielded M8 Inductive Proximity Sensor, 12–24 VDC
Proximity Sensors

F3C-08KN02 Unshielded M8 Inductive Proximity Sens | RFQ Sourcing Details

Proximity Sensors · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryProximity Sensors
Unitset
ModelF3C-08KN02
WiringThree-wire soft-wired cable
Body sizeM8 × 53 mm
Sensor typeUnshielded inductive proximity sensor
Load current100 mA
Cable options2 m or 5 m listed
CategoryProximity Sensors
AvailabilityInquiry required
Source date2026-07-22

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Proximity Sensors. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

The F3C-08KN02 is an unshielded M8 inductive proximity sensor intended for non- . It operates from 12–24 VDC and is listed with a three-wire soft-wired cable, a 100 mA load-current rating, and a sensing frequency of 1000 Hz.

The cylindrical body is specified as M8 × 53 mm, with IP67 protection and an operating-temperature range of -25 to 70 °C without frost or icing.

The detailed specification lists current consumption below 10 mA, leakage current below 0.01 mA at no load, residual voltage below 1.5 VDC at a 100 mA load with a 2 m cable, and repeatability within 2% of sensing distance. Reverse-polarity and output short-circuit protection are listed.

The connection options include 2 m and 5 m, three-wire, soft-wired cables. Configuration must be checked carefully before purchase.

The supplied information contains variant-dependent and conflicting entries: the product heading describes a PNP output, the overview lists NPN or PNP options with normally open or normally closed operation, while the detailed table specifies NPN.NO/NPN.NC.

Sensing distance is also listed both as 2 mm ±10% and as a standard 0–0.8 mm range with 1 mm maximum. Response time appears as both 0.3 ms and 0.5 ms.

Buyers should therefore confirm the exact output circuit, switching state, sensing distance, response time, cable length, pin or wire assignment, and complete model suffix on the quotation and datasheet.

For installation approval, also confirm that the stated unshielded mounting arrangement, target material and size, environmental limits, enclosure construction, and electrical protections match the machine design.

Certification documentation, dimensional drawings, wiring diagrams, and the stated 18-month warranty should be verified for the exact supplied variant and purchasing region.

F3C-08KN02 | Applications and Buyer Notes

F3C-08KN02 is organized as a sourcing-ready Proximity Sensors reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time ques

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Proximity SensorsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Model
F3C-08KN02Based on visible page data; confirm exact value in the RFQ.
Wiring
Three-wire soft-wired cableBased on visible page data; confirm exact value in the RFQ.
Body size
M8 × 53 mmBased on visible page data; confirm exact value in the RFQ.
Sensor type
Unshielded inductive proximity sensorBased on visible page data; confirm exact value in the RFQ.
Load current
100 mABased on visible page data; confirm exact value in the RFQ.
Cable options
2 m or 5 m listedBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryProximity Sensors
Unitset
ModelF3C-08KN02
WiringThree-wire soft-wired cable
Body sizeM8 × 53 mm
Sensor typeUnshielded inductive proximity sensor
Load current100 mA
Cable options2 m or 5 m listed
Response timeConflicting listings: 0.3 ms and 0.5 ms
Detected objectMetal
Sensing distanceConflicting listings: 2 mm ±10%, and 0–0.8 mm standard with 1 mm maximum
Operating voltage12–24 VDC;detailed table states ±10%
Protection ratingIP67
Relative humidity35–95% RH without frost
Sensing frequency1000 Hz
Current consumptionLess than 10 mA
Protection functionsReverse-polarity protection and output short-circuit protection listed
Operating temperature25 to 70 °C without frost or icing
Approximate net weight32 g

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

PLCDriveHub related sourcing paths

Related applications PLCDriveHub related paths

Machine Retrofit Projects

Robotic Picking And Inspection

Related solutions PLCDriveHub related paths

Sensor And Drive Integration

PLCDriveHub procurement phrases

PLCDriveHub related product samples

Supplier profile

PLCDriveHub Imported Supplier Pool
主营:Proximity Sensors

View full profile >